The 250kg capacity water hopper suspended on load cells is supplied by a 2 stage water delivery system and mounted above the mixer to ensure higher accuracy.

Mounted above the pan mixer, the cement weigh hopper features two 350kg capacity hoppers mounted on three load cells for accurate weighing.

Aggregates are transferred to the mixer via an 800mm wide chevron belt conveyor.

Two external delivery screws feed into the the cement weigh hopper and retract back on rollers for transport.

The extensive access & maintenance platforms are provided to mixer level are easily removed for transportation.

Has four compartments for different aggregate sizes, each compartment holding 11m³ of material with bolted hopper extensions which are removed for transport. Vibrators are mounted on two of the hoppers to prevent build up of fine material.

Suspended on load cells, the 800mm wide troughed weigh conveyor has a combined volumetric weighing capacity of 1.5m³ from all hoppers.

The integral, chassis mounted 35m³ capacity cement silo mounted above the transfer conveyor has two discharge troughs each with high and low level indicators. Cement is delivered to the weigh hoppers via two internally fitted screws.

The control cabin is pre-wired and fully tested prior to despatch. The Constar PLC based control system gives fast, accurate measurement of mix ingredients, as well as monitoring dynamic aspects of the plant for continuous and safe operation.

The high quality pan mixer features hard wearing abrasive resistant liner plates, paddle arms and tips. The arms are spring loaded and adjustable to compensate for wear and the paddle tips can be adjusted to increase or decrease the angle.